Three way Line Array system

GL-12

The POPE Professional® GL-12 is a three-way Line Array system.

The Line Array speaker consist of one 12" Neodymium woofer that is circuited independently, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5" Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.

 

 

Application

Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues etc..

Features

The POPE Professional® GL-12 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 125dB continuous,136dB peak, Wide bandwidth 55Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.

The enclosure constructed with 3/4" (18 mm) Finnish birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x Neutrik® 8 pin connector. The GL-12 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XD Series or XP Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions.

Specifications
Line Array Element

Model GL-12
Article No. #10022
Class Three way Line Array Speaker
Power Rating 1800 W Continuous*
Frequency Response (± 3dB) 80Hz - 20kHz
Frequency Range (-10dB) 72Hz - 20kHz
Horizontal Coverage Angle (-6dB) 90 deg. nominal (250Hz - 16kHz)
Vertical Coverage Angle (-6dB) Varies with array size and configuration
Flying Kit Heat treated aluminum, front fittings are fixed connection and rear fittings have several angle options for selection from 0° to 10°With 1°adjustable slots
SPL** 125dB Continuous, 136dB peak
Recommended Signal Processing POPE Professional® XD Series or XP Series DSP
Transducer Sections
Low Frequency 1*12" (300mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 100 mm (4")
Voice Coil Material Aluminum In/Out
Magnet Material Neodymium Slug
Chassis Type Cast Aluminum
Cone Surround Triple roll treated polycotton
Former Material Glass Fibre
Input Power Rating /
Each Driver
600 Watts Continuous. Pink Noise
1200 Watts Program
2400 Watts Peak
Bandpass Sensitivity 98 dB SPL (1W @ 1m)
 
Recommended Frequency 80 Hz - 350 Hz
Bandpass Nominal Impedance
Mid Frequency 4*6.5" (160mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 52mm (2")
Voice Coil Material Flat Aluminum Wire / Out
Magnet Material Neodymium Ring
Chassis Type Cast Aluminum
Cone Surround Half roll treated polycotton
Input Power Rating 4*250 Watts Continuous. Pink Noise
4*500 Watts Program
4*1000 Watts Peak
Bandpass Sensitivity 97dB SPL (1W @ 1m)
Recommended Frequency 350 Hz – 1800 Hz
Bandpass Nominal Impedance

Series / Parallel: 8Ω
Discrete: 8Ω x 4

High Frequency 2*3" (75mm) Compression driver
Voice Coil Diameter 75 mm (3")
Magnet Material Neodymium
Throat Diameter 36 mm (1.4")
Diaphragm Material Titanium
Voice coil material Edgewound flat aluminum
Power Rating 2*100 Watts Continuous. Pink Noise.
2*200 Watts Program
2*400 Watts Peak
Bandpass Sensitivity 109.5 dB SPL (1W @ 1m)
Recommended Frequency 1800Hz – 20kHz
Bandpass Nominal Impedance Parallel: 8Ω
Discrete: 16Ω x 2
Enclosure
Box Construction 18 mm, 13-ply Finnish birch plywood Trapezoidal Wedge frustum 5 degree side angle enclosure, Composite structure
Finish Matt textured environmental friendly water proof paint
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with Aluminum mesh
Input Connectors Neutrik® Speakon® NL-8 (x2) HF:+1-1/MID:+2-2/Low:+3-3 (Input & Parallel connection)
Compatible Sub-woofer All models of POPE Professional® Sub-woofers
Packing Foam with wooden crate carton packing or Flight case - optional
Dimensions (H x W x D) 367mm x 780mm x 503mm
Weight 53.5kg (118.2 lbs)