The POPE Professional® XT-4040 is our most complete fixed architecture digital processor with a focus on audio performance,
FIR filters, and digital I/O flexibility. Our state of the art processor provides 96 kHz sampling, 40 bit floating point Analog Devices Sharc DSP engine, high performance 24 bit converters, precise algorithms, IIR crossover filters, and Dante®, AES In / Out. The result is best in class audio performance and feature set.
The POPE Professional® XT-4040 can be configured stand alone or remote controlled via with the supplied POPE Professional® SoundNet® Networking software application GUI. This Graphic User Interface is not only gives a clear overview off all settings, but at the same time provides you with real time hands on control over all your system parameters. For both fixed and touring applications, the XT-4040 offers you reliable top high end quality sound.
The XT-4040 DSP is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.
Features
• Dante® /AES Digital In / Out
• Analog 4 in 4 out configuration
• FIR/IIR Filter per Input & Output
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Sampling rate 96 kHz - 40 bit floating point DSP
• 500ms Delay per Input and Output
• X-Over, DynEQ, RMS / PEAK Limiters
• Phase correction and 24 Presets
• Password protection
• Up to 255 devices in one network
• 1U Rack design
Application
• Live Sound
• Touring Concerts
• Club Systems
• Places of Worship
• Large Nightclubs
• Cinema Theaters
Specifications
| Model | XT-4040 |
| Class | 4 In / 4 Out Digital Signal Processor |
| Front Panel Controls | |
| Display | 2x16 Characters Backlit LCD |
| Level meters | 5 Segment LEDs |
| Buttons | 5 System Menu Controls, 4 Mute/Channel Controls, 1 Dial Encoder |
| Connectors | |
| Analog | 3-pin XLR (four female for input & four male for output) |
| Digital I/O (Dante®/AES) | 2 x RJ-45 Female |
| DE-44 Dante® Module | Male 2 x 25 pin dual header connector, Plastic quick connector |
| Power | Standard IEC Socket |
| Inputs and Outputs | |
| Input Impedance | >10k Ohms |
| Output Impedance | 50 Ohms |
| Maximum Level | +20dBu |
| Type | Electronically balanced |
| Audio Performance | |
| Frequency Response | +/- 0.1dB (20 to 30kHz) |
| Dynamic Range | 115 dB typ (unweighted) |
| CMMR | >100dB (50 to 10kHz) |
| Crosstalk | < -100dB |
| Distortion | 0.002% (1kHz @ +4dBu) |
| Digital Audio Performance | |
| Processor (DSP) | 40-Bit Floating Point |
| Sampling Rate | 96kHz |
| Analog Converters | Super Performance 24-bit |
| Propogation Delay | 1.5ms (1.75-7.75 with FIR) |
| Audio Control Parameters | |
| Gain | -120 to +15dB in 0.1 dB steps |
| Polarity | + / - |
| Delay | Up to 500 ms per In/Out |
| In - Gain/IIR | |
| Variable Equalizers | 5 per In |
| Mode | OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2 |
| Gain | -15 to +15dB in 0.1dB steps |
| Frequency | 20 to 20kHz |
| In - FIR | Bypass / Load FIR |
| Out - Gain/IIR | |
| Variable Equalizer | 10 per Out |
| Mode | OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2 |
| Gain | -15 to +15dB in 0.1dB steps |
| Frequency | 20 to 20kHz |
| Quality | 0.5-100 |
| Out – DynEQ | |
| Filter: | |
| Variable Equalizer | 2 per Out |
| Mode | OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2 |
| Gain | -15 to +15dB in 0.1dB steps |
| Frequency | 20 to 20kHz |
| Quality | 0.5-100 |
| System Parameters | |
| No. Of Programs | 30 |
| Delay Units | Millisecond, Feet, Meter |
| Frequency Mode | 36 steps/Oct, 1Hz Resolution |
| Security locks | Password |
| Channel names | 6 Characters |
| General | |
| Power | 90-265 VAC (50/60Hz) – 20VA |
| Dimensions (H x W x D) | 44mm x 483mm x 229 mm |
| Weight | 4.6 Kg (10.13 lbs) |