MAC Series

Description

The POPE Professional® MAC Series of Amplifiers are specially designed for professional sound and installation. It's unique design and powerful output can meet the requirement of any sound reinforcement project.

 

power amplifiers ma

 

Features

  • CLASS H circuit to improve the power amplifier's efficiency, stability & decrease the temperature in operation.
  • Short-circuit protection, over- temperature protection and DC protection.
  • The fan with variable speed for cooling.
  • Built-in compression function to prevent the power amplifier from distortion of over input.

Application

The MAC Series Amplifiers can use stadium, dance hall, concerts and touring live performances.

Power Output

Ratings (RMS @ 1% THD @ 230VAC)

Model MAC-3202 MAC-5202 MAC-7202 MAC-8202
Article No. #10013 #10014 #10015 #10016
Number of channels 2 2 2 2
Total output all channels driven 1300 W @ 4 ohms 1900 W @ 4 ohms 2600 W @ 4 ohms 4000 W @ 4 ohms
Max. Output Power 4 ohms 8 ohms 4 ohms 8 ohms 4 ohms 8 ohms 4 ohms 8 ohms
Per channel watts 650 W 400 W 950 W 600 W 1300 W 800 W 2000 W 1300 W
Bridge Mono 1300 W 800 W 1900 W 1200W 2600 W 1600 W 4000 W 2600W

Specifications

Frequency Response ±0.1 dB from 20 Hz to 20 kHz at 1 watt
Phase Response ±10 degrees from 10 Hz to 20 kHz at 1 watt
THD 0.05%
Intermodulation Distortion
(IMD)
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB)
Signal-to-Noise Ratio >105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz.
CMRR (20 Hz to 1 kHz) > 55 dB, typically > 70 dB
Crosstalk > 80 dB (below rated power, 20 Hz to 1 kHz)
Slew Rate 80V/usec
Damping Factor >1,400 from 10 Hz to 400 Hz
Input Impedance (Nominal) 20KΩ Balanced
Signal Input Two balanced 3-pin female XLR connectors
Signal Output Parallel two balanced 3-pin male XLR connectors
Input Sensitivity gain 0.775 / 1 / 1.44 Volt
Output Circuitry Class H
Output Connector Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector
Connectors Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector
LED Indicator Power, Signal, Protect, Clip
Protection Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients
Cooling System Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow
Construction Steel chassis with durable black powder coat finish
Power Supply Toroidal Transformer
Power Range 200 - 240V AC @ 50Hz
Mains Powercord
Input Watts
(Power Consumption)
660W
850W
1200W
1600W
Dimension (W x D x H)
482mm × 443.5mm × 88.8mm
482mm × 468mm×132mm
Size
2U
3U
Net Weight 21.2 kg (46.7 lbs) 23.3 kg (51.3 lbs) 24.2 kg (53.3 lbs) 33.4 kg (73.6 lbs)
Gross Weight
25.2 kg (55.5 lbs)
27.1 kg (59.7 lbs)
28.0 kg (61.7 lbs)
37.4 kg (82.4 lbs)