The POPE Professional® AC-212 is a three-way powered Line Array speaker system designed for large venues and live concert.
The Line Array speaker consist of POPE Professional® dual 12” Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® AC-212 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 130dB continuous, 138dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.
The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The AC-212 systems are designed to be powered by POPE Professional® L-13H Class-D amplification.
Application
• Touring sound
• Small and medium-scale Live Sound Reinforcement events
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
• Live sound open-air venues, arenas, concerts, fixed installations,multi-purpose auditoria, sports venues etc..
Features
• High efficiency and light weight Neodymium Drivers
• HF horn and Phase Aligned LF drivers for exceptional 90° horizontal coverage pattern
• 1:9 safety standard rigging hardware
• 2*12" LF, 4*6.5” & 2*1.4” throat Compression driver
• Class-D amplification
• 32 bit / 96kHz DSP Processing
Specification
Line Array Elements
| Model | AC-212 |
| Class | Three way Powered Line Array Speaker |
| Frequency Response (± 3dB) | 80Hz - 20kHz |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 10° |
| Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
| SPL** | 130dB Continuous, 138dB peak |
| Electronics Sections | |
| Amplifier | |
| Model | L-13H |
| Total Power | 8200W Peak, 4100W RMS Continuous |
| High Frequency | 1600W Peak, 800W RMS Continuous |
| Mid Frequency | 1600W Peak, 800W RMS Continuous |
| Low Frequency | 5000W Peak, 2500W RMS Continuous |
| Cooling | Aluminum heat Sink with two Fans |
| Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
| Power | AC 200-240V @ 50Hz |
| Processor | |
| In/Out | 1 In / 3 Out |
| DSP | 32 bit / 96kHz DSP |
| Signal | Balanced or Unbalanced input / Balanced output |
| Connectors | XLR female Combo and XLR male |
| Control | USB |
| Preset | 4 |
| Transducer Sections | |
| High Frequency | 2*1.4" throat POPE Professional® Compression driver |
| Voice Coil Diameter | 75 mm |
| Magnet Material | Neodymium |
| Diaphragm Material | Titanium |
| Mid Frequency | 4*6.5" (165 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 53.24 mm |
| Magnet Materia | Neodymium |
| Low Frequency | 2*12" (305 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 102.01 mm |
| Magnet Material | Neodymium |
| Enclosure | |
| Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
| Finish | SoundFlex® environmental friendly coating |
| Suspension System | Integral hinge bars and quick release pins |
| Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
| Packing | Foam with wooden crate carton packing or Two speakers in one flight case - optional |
| Dimensions (H x W x D) | 380 mm × 1093.5 mm × 530 mm |
| Net Weight | 72 kg |
| Gross Weight | 190 kg - 2 Speakers in 1 flight case packed |