Description
The POPE Professional® AC series, AC-2122 is a three-way powered Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of POPE Professional® two 12” Neodymium woofer that is circuited independently and two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® AC-2122 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 128dB continuous, 134dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.
The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The AC-2212 systems are designed to be powered by POPE Professional® Class-D amplification.
Application
• Touring sound
• Small and medium-scale Live Sound Reinforcement events
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
• Live sound open-air venues, arenas, concerts, fixed installations,
multi-purpose auditoria, sports venues etc..
Features
• High efficiency and light weight Neodymium Drivers
• HF horn and Phase Aligned LF drivers for exceptional
90° horizontal coverage pattern
• 9:1 safety standard rigging hardware
• 2*12" LF & 2*1.4” throat Compression driver
• Class-D amplification
• Built-in DSP
Specifications
| Model | AC-2122 |
| Article No. | #10165 |
| Class | Two way Powered Line Array Speaker |
| Frequency Response (± 3dB) | 80Hz - 20kHz |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 10° |
| Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
| SPL** | 128dB Continuous, 134dB peak |
| Electronics Sections | |
| Amplifier | |
| Model | ML-4 |
| Total Power | 4600W Peak, 2300W RMS Continuous |
| High Frequency | 600W Peak, 300W RMS Continuous |
| Mid Frequency | 2000W Peak, 1000W RMS Continuous |
| Low Frequency | 2000W Peak, 1000W RMS Continuous |
| Cooling | Two Fans |
| Power Connector | Neutrik® powerCON NAC3MPA-1 In / NAC3MPB-1 Out |
| Power | AC 200-240V @ 50Hz |
| Processor | |
| In/Out | 1 In/3Out |
| DSP | 32 bit Floating Point / 48kHz |
| Connectors | Neutrik® XLR Male and Female |
| Control | USB/RS-485 |
| Preset | 32 |
| Transducer Sections | |
| High Frequency | 2*1.4" throat POPE Professional® Compression driver |
| Voice Coil Diameter | 75 mm (3”) |
| Magnet Material | Neodymium |
| Diaphragm Material | Titanium |
| Low Frequency | 2*12" (305 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 75 mm (3”) |
| Magnet Material | Neodymium |
| Enclosure | |
| Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
| Finish | SoundFlex® environmental friendly coating |
| Suspension System | Integral hinge bars and quick release pins |
| Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
| Packing | Foam with wooden crate carton packing or Two speakers in one flight case - optional |
| Dimensions (H x W x D) | 367 mm × 670 mm × 504 mm |
| Net Weight | 57 kg (125.62 lbs) |
| Gross Weight | 156 kg (343.82 lbs) - 2 Speakers in 1 flight case packed |