Description
The POPE Professional® TA Series, TA-10 is a two-way Passive Line Array Speaker and it's powered by TA-18BF flyable Sub-woofer. One TA-18BF flyable Sub-woofer can power the two TA-10 Line Arrays. The POPE Professional's innovated rigging hardware can fly 8 cabinets array with 9:1 safety standard. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.
The POPE Professional's TA-18BF flyable sub-woofer have the same outer entire steel and aluminum hanging accessory like TA-10 Line Array and it can be hang together. Also TA-10 Line Array can be stacked on TA-18BF as ground stacking array system.
The POPE Professional TA-18BF flyable sub-woofer utilizes an 18” LF transducer and provides extremely high levels of tight, punchy bass to the lowest octave of human hearing. The TA-10 Line Array utilizes a 10” LF transducer and a 1.4” throat HF compression driver. It's engineered both a companion and applications requiring extremely high output in a relatively small package.
Applications
• Small and medium-scale Live Sound Reinforcement events
• Arenas, live theaters, concert venues, corporate AV, Places of worship
Features
• High efficiency and light weight Neodymium Drivers
• HF horn and Phase Aligned LF drivers for exceptional 100° horizontal coverage pattern
• 9:1 safety standard rigging hardware
• 10" LF and 1.4” throat Compression driver
• Powered by 18” Sub-woofer
• Class-D amplification
• Built-in DSP
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
Specifications
Line Array Element
Model | TA-10 & TA-18BF |
Class | Two way Line Array Speaker & Flyable Powered Sub-woofer |
Frequency Response | 24Hz - 20kHz |
Horizontal Coverage Angle | 100° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 126dB Continuous, 135dB peak |
Electronics Sections | |
Amplifier | |
Model | VT-6 |
Total Power | 10000W Peak, 5000W RMS Continuous |
Amp Output (Sub) | 5000W Peak, 2500W Continuous |
Amp Output (CH-3 & CH-4) | 5000W Peak, 1250W + 1250W @ 4Ω Continuous |
Speakon Wiring | CH-3: +1 -1 and CH-4: +2 -2 |
Cooling | Aluminum heat Sink with Fan |
Power Connector | In with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 2 In / 4 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | LAN |
Preset | 24 |
For more specifications about DSP | Check the XT-4040 product catalogue |
Transducer Sections | |
High Frequency | 1*1.4" throat POPE Professional® Compression driver |
Voice Coil Diameter | 75 mm (3") |
Magnet Material | Neodymium |
Diaphragm Material | Titanium |
Speakon Wiring | +2, -2 |
Low Frequency | 1*10" (250 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 78.91 mm (3”) |
Magnet Material | Neodymium |
Speakon Wiring | +1, -1 |
Subwoofer | 1*18" (457 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 100 mm (4”) |
Magnet Material | Ferrite |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal Line Array & 18 mm, 11-ply birch Faced plywood Rectangle Flyable Sub-woofer enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille |
Packing | Foam with wooden crate carton box packing |
Model | TA-10 | TA-18BF |
Dimensions (H x W x D) | 325 mm × 550 mm × 352 mm | 660 mm × 550 mm × 742 mm |
Net Weight | 22 kg | 70 kg |
Gross Weight | 29 kg | 81 kg |