Description
The POPE Professional® DC-1000 amplifier is designed for commercial and industrial sound reinforcement. All the controls are in the front panel for easy access. The DC Series amplifier can drive 4-16 ohm or constant voltage loudspeakers.
Features
• 6 Mic, 2 Aux and L,R Inputs
• Short circuit, over-current, over-heat, and overload protection
• Multifunctional device
• 48V phantom power for 6 mics and 1, 2 mic priority
• Provide 4-16 ohm and constant-voltage output (70V and 100V)
• L, R mix outputs
• Parallel, Stereo and Bridge selection
Application
This Amplifier can use in meeting rooms, classrooms/schools, houses of worship, courtrooms, multi zone paging/music, theme parks, museums, office and conference rooms.
Power Output
Ratings (RMS @ 1% THD @ 230VAC)
| Model | DC-1000 | |||||
| Article No. | #10017 | |||||
| Number of channels | 2 | |||||
| Total output all channels driven | 1000 W @ 4 ohms | |||||
| Max. Output Power | 4 ohms | 8 ohms | 70 V | 100 V | ||
| Stereo Mode (per channel watts) | 500 W | 300 W | 500 W | 500 W | ||
| Bridge Mode |
1000 W
|
|||||
Specifications
| THD+N (typical) | < 0.05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power) | |||
| Signal To Noise-Ratio | > 120 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load) | |||
| Frequency Response |
20 Hz - 20 kHz ± 0.25 dB / 20 Hz - 20 kHz ± 0.15 dB (8 Ω load, 1 dB below rated power) |
|||
| Output Circuitry | Class D - full bandwith PWM modulator with ultra low distortion | |||
| Input impedance | 15 kΩ balanced | |||
| Damping Factor | > 2000 (8 Ω load, 1 kHz and below) | |||
| Gain and Level | ||||
| Amplifier gain selectable (Sensitivity) | 0.7 / 1.0 / 1.44 Volt | |||
| Level adjustment (per ch.) | Front-panel potentiometer | |||
| Connectors and Switches | ||||
| Input connectors (per ch.) |
Neutrik® 3-pin XLR electronically balanced for L & R, Neutrik® 3-pin XLR & TRS Combo for 6 mic, Female RCA for Aux 1, 2 |
|||
| Output connectors (per ch) | Neutrik® 3-pin XLR, electronically balanced and Neutrik® 4 Pin Speakon | |||
| Power on/off | on front-panel switch | |||
| Cooling | One fan, front-to-rear airflow | |||
| Front-panel indicators | ||||
| Per channel | Power / Signal / Limit / Protect / Parallel / Bridge / 6 mic / 2 Aux | |||
| Parallel | 1 & 2 Channels | |||
| Safety | ||||
| Protection Circuits | Input limiter, short circuit protection, DC protection of output, under & over voltage protection, SOA protection, intelligent mains fuse protection, power stage overload protection, temperature protection of transformers and heat-sinks | |||
| Power | ||||
| Type | Universal & regulated switch mode power supply with Power Factor Correction (PFC) | |||
| Operating voltage | Universal Mains, 85-265V AC | |||
| Mains | Power Cord | |||
| Dimensions (W x D x H) |
482 mm × 443.5 mm × 88.8 mm
|
|||
| Size |
2 U
|
|||
| Net Weight |
10.1 kg (22.2 lbs)
|
|||
| Gross Weight |
13.6 kg (29.9 lbs)
|
|||
| Finish | Black painted steel chassis with aluminum front panel | |||