ML-1.5

Sub Woofer L-8A

 

Features

• Very high power and channel density
• Class - D Technology
• Power Factor Correction (PFC)
• Two-channel flexibility
• XLR input and output connectors
• AES/EBU Digital In/Out
• Ethernet Control
• powerCON In/Out
• Built in DSP
• Self protection design
• Efficient cooling system
• Comprehensive protection

Read More

Description

The POPE Professional® SM Series is a compact, high performance coaxial powered stage monitor which combines maximum enclosure volume with optimum presentation angle in a low profile and contemporary design. It features a high-performance 12” (300 mm) and 15”(380 mm) Coaxial driver unit mounted on a differential dispersion enclosure. The SM Series is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.

 

Applications

• Speech reinforcement
• Live performance stage monitoring
• Reinforcement of vocal and music

 

Features

•  FIR/IIR Filters
•  Dante® / AES / Analog Input
•  40 bit floating point / 96kHz DSP Processing
•  Class-D amplification
•  SoundNet® Networking software
•  Ethernet Connectivity
•  24 bit AD/DA converters
•  Built-in DSP
• 15” Coaxial Driver

 

Specification

Model SM-15C
Class 1*15" Powered Coaxial Monitor
Frequency Response 76Hz - 20kHz
Horizontal Coverage Angle 55°
Vertical Coverage Angle 35°
SPL** 114dB Continuous, 120dB peak
Electronics Sections
Amplifier  
Model VT-3
Total Power 6600W Peak, 3300W RMS Continuous
Amplifier Output (HF) 1600W Peak, 800W RMS Continuous
Amplifier Output (LF) 5000W Peak, 2500W RMS Continuous
Cooling Aluminum heat Sink with Fan
Power Connector In / Out with Rubber sealing cover
Power AC 85-265V @ 50-60Hz
Processor  
In/Out 1 In / 2 Out
DSP 40 bit / 96kHz DSP
Filters FIR / IIR, Frequency, Gain, RMS Limiter
Analog Signal Balanced Input / Output
Digital Signal Dante® / AES (DE-44 Dante® Module - Optional)
Connectors XLR male / female and Ethernet
Control LAN
Preset 24
For more specifications about DSP, check the XT-4040 product catalogue
Transducer Sections
High Frequency 3" (75 mm) Compression driver
Voice Coil Diameter 75 mm (3”)
Magnet Material Ferrite
Diaphragm Material Titanium
Low Frequency 1*15" (380 mm) Diameter Transducer
Voice Coil Diameter 75 mm (3")
Magnet Material Ferrite
Enclosure
Box Construction 18 mm, 11-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Mounting 35 mm Pole Mount
Suspension System Floor / Tripod Stand
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Packing Foam with wooden crate carton packing or Two speakers in one flight case - optional
Dimensions (H x W x D) 393 mm × 645 mm × 562 mm
Net Weight 35 kg
Gross Weight 44 kg


 

Description

The POPE Professional® SM Series is a compact, high performance coaxial powered stage monitor which combines maximum enclosure volume with optimum presentation angle in a low profile and contemporary design. It features a high-performance 12” (300 mm) and 15”(380 mm) Coaxial driver unit mounted on a differential dispersion enclosure. The SM Series is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.

 

Applications

• Speech reinforcement
• Live performance stage monitoring
• Reinforcement of vocal and music

 

Features

•  FIR/IIR Filters
•  Dante® / AES / Analog Input
•  40 bit floating point / 96kHz DSP Processing
•  Class-D amplification
•  SoundNet® Networking software
•  Ethernet Connectivity
•  24 bit AD/DA converters
•  Built-in DSP
• 12” Coaxial Driver

 

Specification

Model SM-12C
Class 1*12" Powered Coaxial Monitor
Frequency Response 80Hz - 20kHz
Horizontal Coverage Angle 55°
Vertical Coverage Angle 35°
SPL** 110dB Continuous, 116dB peak
Electronics Sections
Amplifier  
Model VT-3
Total Power 6600W Peak, 3300W RMS Continuous
Amplifier Output (HF) 1600W Peak, 800W RMS Continuous
Amplifier Output (LF) 5000W Peak, 2500W RMS Continuous
Cooling Aluminum heat Sink with Fan
Power Connector In / Out with Rubber sealing cover
Power AC 85-265V @ 50-60Hz
Processor  
In/Out 1 In / 2 Out
DSP 40 bit / 96kHz DSP
Filters FIR / IIR, Frequency, Gain, RMS Limiter
Analog Signal Balanced Input / Output
Digital Signal Dante® / AES (DE-44 Dante® Module - Optional)
Connectors XLR male / female and Ethernet
Control LAN
Preset 24
For more specifications about DSP, check the XT-4040 product catalogue
Transducer Sections
High Frequency 3" (75 mm) Compression driver
Voice Coil Diameter 75 mm (3”)
Magnet Material Ferrite
Diaphragm Material Titanium
Low Frequency 1*12" (300 mm) Diameter Transducer
Voice Coil Diameter 75 mm (3")
Magnet Material Ferrite
Enclosure
Box Construction 18 mm, 11-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Mounting 35 mm Pole Mount
Suspension System Floor / Tripod Stand
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Packing Foam with wooden crate carton packing
Dimensions (H x W x D) 325 mm × 545 mm × 462 mm
Net Weight 24 kg
Gross Weight 31 kg

 

About Us

POPE Professional Acoustics Ltd provides manufacturing, design and installation services to a wide range of POPE Professional sound equipment for Places for Worship, Auditorium, Seminar hall, Conference Hall, Discotheques and Live Sound. In the sound industry, POPE Professional is one of the leading brands in India. Our widest range of products provides to the different needs and taste of a myriad of Customer requirement for any application in the field of professional sound.

Recent News