Description
The POPE Professional® MR Seried Mixer Amplifier are designed for a wide variety of voice and background music application such as retail shops, restaurants and bars, service centers, houses of worship, warehouse etc.
Features
• Class-D circuit
• 70 / 100 V and 4 - 16 Ω Output
• USB / FM / Bluetooth Media Player
• MIC 1, MIC 2, BAL, 100V, AUX, Treble, Bass & Master control
• 48V Phantom Power for MIC 1
• PRE Signal Output
Application
• Shopping Malls
• Places of worship
• Ballrooms
• Coffee shops
• Educational Institutions
Specifications
|
Model
|
MR-250
|
MR-600
|
MR-1200 |
|
Output Power
|
250W
|
600W
|
1200W
|
|
SMPS RMS Power Limit
|
280 W
|
700 W
|
1500 W
|
|
Mains power supply
|
Universal Mains with PFC, 90-270 VAC @ 50Hz to 60Hz
|
|
Amplifier topology
|
Class D, 94% efficiency
|
|
Frequency response
|
20 Hz - 20 kHz (+0/-0.25 dB (8Ω load, 3 dB below rated power)
|
|
THD (1Khz @ 1W)
|
0.0030%
|
|
Input
|
MIC 1, MIC 2, Balanced Input, 100V Line Input, AUX Input
|
|
Media
|
USB / FM / Bluetooth
|
|
Output
|
70/100V or 4-16 ohms output and PRE Signal output
|
|
Phantom Power
|
On / OFF Switch for MIC 1
|
|
Signal To Noise-Ratio
|
119 dB(A)
|
|
Dynamic range
|
119 dB(A)
|
|
Damping factor @ 8Ohm
|
>350
|
|
Output Connector
|
Phoenix
|
|
Input Connector
|
Phoenix
|
|
LED Indicator
|
Power, Signal, Protect, Clip
|
|
Protection
|
Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection.
|
|
Operating Temperature & Humidity
|
-10°C to 50°C @ 90% relative humidity (non condensing)
|
|
Cooling
|
Heat dissipation through heat sink with temperature-controlled fan
|
|
Size
|
2U
|
|
Amplifier Dimension (LxWxH)
|
482 mm x 333 mm x 88 mm
|
|
Packing Dimension (LxWxH)
|
535 mm x 425 mm x 195 mm
|
|
Model
|
MR-250
|
MR-600
|
MR-1200
|
|
Net Weight
|
6.40 kg
|
7.00 kg
|
7.10 kg
|
|
Gross Weight
|
8.00 kg
|
8.65 kg
|
8.70 kg
|
Note:
1) All specifications are typical values.
2) The amplifier will be fully operational at 2 ohm loads, but due to physical constraints in the construction, this mode of operation is not recommended.