ML-212

Description

The POPE Professional® ML-212 is a Four-way Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of POPE Professional®, two 12” Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.

The POPE Professional® ML-212 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 130dB continuous, 138dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.

The enclosure constructed with 3/4” (18 mm) birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x 8 pin Speakon connector. The ML-212 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XT Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions.

 

Applications

•    Touring sound
•    Small and medium-scale Live Sound Reinforcement events
•    Arenas, live theaters, concert venues, corporate AV, Places of worship
•    Delay systems for large scale outdoor sound reinforcement
•    Fixed installations, multi-purpose auditoria, sports venues etc..

 

Features

•    Neodymium Drivers
•    90° horizontal coverage pattern
•    9:1 safety standard rigging hardware
•    2*12" LF, 4*6.5” & 2*1.4” throat Compression driver

Specifications

Model ML-212
Class Four way Line Array Speaker
Power Rating 3020 W Continuous*
Frequency Response (± 3dB) 80Hz - 20kHz
Frequency Range (-10dB) 72Hz - 20kHz
Horizontal Coverage Angle (-6dB) 90 deg. nominal (250Hz - 16kHz)
Vertical Coverage Angle (-6dB Varies with array size and configuration
Flying Kit Heat treated aluminum, front fittings are fixed connection and rear fittings have several angle options for selection from 0° to 10°With 1°adjustable slots
SPL** 130dB Continuous, 138dB peak
Recommended Signal Processing POPE Professional® XT Series DSP
Transducer Sections
Low Frequency 2*12" (300 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 100 mm (4")
Voice Coil Material Copper
Magnet Material Neodymium Inside Slug
Chassis Type Cast Aluminum
Cone Surround Triple roll treated polycotton
Former Material Glass Fibre
Input Power Rating 1000 Watts Continuous. Pink Noise
2000 Watts Program
4000 Watts Peak
Sensitivity 96 dB SPL (1W @ 1m)
Recommended Frequency 80 Hz - 350 Hz
Nominal Impedance
Mid Frequency 4*6.5" (170 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 50 mm (2")
Voice coil material Aluminum Wire
Magnet Material Neodymium Ring
Chassis Type Cast Aluminum
Cone Surround Half roll treated polycotton
Power Rating / Both drivers 4*200 Watts Continuous. Pink Noise
4*400 Watts Program
4*800 Watts Peak
Sensitivity 98dB SPL (1W @ 1m)
Recommended Frequency 350 Hz – 1800 Hz
Nominal Impedance Series / Parallel: 8Ω
            Discrete: 8Ω x 4
High Frequency 2*1.4" throat POPE Professional® Compression driver
Voice Coil Diameter 75 mm (3")
Magnet Material Neodymium
Throat Diameter 36 mm (1.4")
Diaphragm Material Titanium
Voice coil material Edge-wound flat Aluminum Wire
Power Rating / Both drivers 2*110 Watts Continuous. Pink Noise.
2*220 Watts Program
2*440 Watts Peak
Sensitivity 109.5dB SPL (1W @ 1m)
Recommended Frequency 1800Hz - 20kHz
Nominal Impedance
Enclosure
Box Construction 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Input Connectors 8 pin Speakon (x2) HF:+1-1 / MID:+2-2 / Low1:+3-3 / Low2:+4-4 (Input & Parallel connection)
Compatible Sub-woofer All models of POPE Professional® Sub-woofers
Packing Foam with wooden crate carton packing or Four speakers in one flight case - optional
Dimensions (H x W x D) 367 mm × 1088 mm × 504 mm
Net Weight 67 kg (147.67 lbs)
Gross Weight 77 kg (169.70 lbs)