Description
The POPE Professional® MS Series 8 channel amplifier enables you to realize versatile multi zones setups, for retail-shops, fuel stations and multi-purpose halls. You can even think of club installations with sub-woofers and tops.
The MS Series are lightweights, thanks to class D architecture and efficient switch mode power supply.
Features
• 8 Channels in 2U rack space
• 8-ohm bridge operation possible
• Signal inputs via balanced XLR mounting jacks and terminal blocks
• Speaker connection via terminal blocks
• Tamper-proof level adjustment on the rear panel
• 3-fold output meter with clip LED per channel
• Robust steel chassis with aluminum front
• Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
Application
The MS Series amplifiers can use in meeting rooms, classrooms / schools, houses of worship, courtrooms, multi zone paging / music, theme parks, museums, office and etc.
Power Output
Ratings (RMS @ 1% THD @ 230VAC)
| Model | MS-500 | MS-800 | ||||
| Number of channels | 8 | 8 | ||||
| Total output all channels driven | 4000 W @ 8 / 4 ohms | 10000 W @ 4 ohms | ||||
| Max. Output Power | 70/100V | 4 ohms | 8 ohms | 70/100V | 4 ohms | 8 ohms |
| Per channel watts | - | 500 W | 250 W | - | 800 W | 400 W |
| Per channel watts | 500 W | 000 W | 1000 W | 800 W | 2500 W | 1500 W |
Specifications
| Frequency Response | ±0.1 dB from 20 Hz to 20 kHz at 1 watt | |
| Phase Response | ±10 degrees from 10 Hz to 20 kHz at 1 watt | |
| THD | 0.05% | |
| Intermodulation Distortion (IMD) | <0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) | |
| Signal-to-Noise Ratio | >105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. | |
| CMRR (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB | |
| Crosstalk | > 80 dB (below rated power, 20 Hz to 1 kHz) | |
| Slew Rate | 80V/usec | |
| Damping Factor | >2000 from 10 Hz to 400 Hz | |
| Input Impedance (Nominal) | 20KΩ Balanced | |
| Signal Input | Two balanced 3-pin female XLR connectors | |
| Signal Output | Parallel two balanced 3-pin male XLR connectors | |
| Input sensitivity gain | 0.775 / 1.0 / 1.44 Volt | |
| Output Circuitry | Class H | |
| Output Connector | Two sets of Red & Black color coded binding posts & 2 Speakon 4 pole chassis connector | |
| Connectors | 3-pin XLR, Speakon 4 pole chassis connector | |
| LED Indicator | Power, Signal, Protect, Clip | |
| Protection | Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients. | |
| Cooling System | Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow | |
| Construction | Steel chassis with durable black powder coat finish and aluminium front panel | |
| Power Supply | Toroidal Transformer | |
| Power Range | 200 - 240V AC @ 50Hz | |
| Mains | Powercord | |
| Input Power (Watts) |
1600W
|
1900W
|
| Dimension (W x D x H) |
482 mm × 443.5 mm × 88.8 mm
|
482 mm × 468 mm × 132 mm
|
| Size | 2U | 3U |
| Net Weight | 22.5 Kg (49.6 lbs) | 32.1 Kg (70.1 lbs) |
| Gross Weight | 26.2 Kg (57.7 lbs) | 36.0 Kg (79.3 lbs) |