MC Series

Description

The POPE Professional® introduces MC Series MC-300, MC-500, MC-700, MC-1000 model new generation professional amplifiers are made based on the field proven Class D technology. These new devices feature two channel models, compact size and light weight. The MC Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.

 

power amplifiers ma

 

Features

  • Switch-mode power supply for highest efficiency and improved audio performance
  • Flow-through air path and solid aluminum heat sinks for maximum cooling
  • Parallel XLR/M and XLR/F connectors for simple loop-through connectivity
  • Neutrik® Speakon® and binding post outputs
  • 2U height, compact size and light weight

Application

The MC Series Amplifiers can use stadium, dance hall, place of worship, educational institutions and clubs.

Power Output

Ratings (RMS @ 1% THD @ 230VAC)

Model MC-300 MC-500 MC-700 MC-1000
Article No. #10097 #10098 #10099 #10100
Number of channels 2 2 2 2
Total output all channels driven 900 W @ 4 ohms 1500 W @ 4 ohms 2400 W @ 4 ohms 3000 W @ 4 ohms
Max. Output Power 4 ohms 8 ohms 4 ohms 8 ohms 4 ohms 8 ohms 4 ohms 8 ohms
Per channel watts 450 W 300 W 750 W 500 W 1200 W 700 W 1500 W 1000 W

Specifications

Frequency Response 20Hz - 20kHz +3/ -0bB
S/N >90dB
Phase Response + / 0.1 degrees from 10 Hz to 20 kHz at 1 watt
THD 0.05%
Crosstalk > 50 dB
THD <0.01% Rated Powered@8Ω
IMD <0.01% Rated Powered@8Ω 1kHz
Damping Factor >600@1kHz / 8 ohms
Slew Rate 20V/ m s (Stereo)
Input Impedance (Nominal) 10K/20K ohms unbalanced or balanced
Signal Input Two balanced 3-pin female Neutrik® XLR connectors
Signal Output Parallel two balanced 3-pin male Neutrik® XLR connectors
Input sensitivity gain 0.775 / 1.0 / 1.44 Volt
Output Circuitry Class D
Output Connector Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector
Connectors Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector
LED Indicator Power, Signal, Protect, Clip
Protection Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature,
chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients
Cooling System Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow
Construction Steel chassis with durable black powder coat finish
Power Supply SMPS
Power Range 200 - 240V AC @ 50Hz
Mains Powercord
Input Watts
(Power Consumption)
300W
450W
600W
800W
Dimension (W x D x H)
482 mm × 245 mm × 88.8 mm
 
Size
2U
Net Weight 6.2 kg (13.6 lbs) 6.6 kg (14.5 lbs) 7.3 kg (16.0 lbs) 7.4 kg (16.3 lbs)
Gross Weight
7.2 kg (15.8 lbs)
7.6 kg (16.7 lbs)
8.3 kg (18.2 lbs)
8.4 kg (18.5 lbs)