Description
The POPE Professional® TT series, TT-210 is a two-way powered Line Array utilizes POPE Professional® 10” transducer and the 1.4” throat compression driver with new technology Directivity Correction Horn (DCH) ensures the constant directivity in the high frequency range. The Waveguide Physical Driver (WPD) increases the output, sensitivity and also improves the directivity of the low frequency range.
The high and of low frequency neodymium magnet drivers are integrates higher efficiency and power handling with reduced weight and dimension. The newly designed bass reflex enclosure has internal symmetrical heat-dispersion tubes to prevent the system from overheating. The POPE Professional's innovated rigging hardware can fly 16 cabinets array with 1:9 safety standards.
The TT Series Line Array is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.
Applications
• Touring sound
• Small and medium-scale Live Sound
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
Features
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
• Neodymium Drivers
• 90° x 10° (H x V) Coverage
• 1:9 safety standard rigging hardware
• 2*10" LF and 1.4” throat Compression driver
• Class-D amplification
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Specifications
Line Array Element
| Model | TT-210 |
| Class | Two way Powered Line Array Speaker |
| Frequency Response | 80Hz - 20kHz |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 10° |
| Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
| SPL** | 125dB Continuous, 133dB peak |
| Electronics Sections | |
| Amplifier | |
| Model | L-8H |
| Total Power | 6600W Peak, 3300W RMS Continuous |
| Amplifier Output (HF) | 1600W Peak, 800W RMS Continuous |
| Amplifier Output (LF) | 5000W Peak, 2500W RMS Continuous |
| Cooling | Aluminum heat Sink with Fan |
| Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
| Power | AC 85-265V @ 50-60Hz |
| Processor | |
| In/Out | 1 In / 2 Out |
| DSP | 40 bit / 96kHz DSP |
| Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
| Analog Signal | Balanced Input / Output |
| Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
| Connectors | XLR male / female and Ethernet |
| Control | LAN |
| Preset | 24 |
| For more specifications about DSP | Check the XT-4040 product catalogue |
| Transducer Sections | |
| High Frequency | 1*1.4" Throat POPE Professional® Compression driver |
| Voice Coil Diameter | 75 mm |
| Magnet Material | Neodymium |
| Throat Diameter | 35.56 mm |
| Diaphragm Material | Titanium |
| Low Frequency | 2*10" (250 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 79.04 mm |
| Magnet Material | Neodymium |
| Enclosure | |
| Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
| Finish | SoundFlex® environmental friendly coating |
| Suspension System | Integral hinge bars and quick release pins |
| Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
| Packing | Foam with wooden crate carton packing or Two speakers in one flight case - optional |
| Dimensions (H x W x D) | 325 mm × 800 mm × 414 mm |
| Net Weight | 34 kg (72.75 lbs) |
| Gross Weight | 40kg (88.18 lbs) |