M-15A

Description

The POPE Professional® M-15A is a compact, high performance active stage monitor combining high output and controlled dispersion with discreet, contemporary design. It features a high performance 15" (380mm) Neodymium low frequency driver unit and a 1.4" (36mm) Neodymium exit throat compression driver mounted on a differential dispersion horn. Differential dispersion technology increases the area over which a constant SPL and consistent frequency response is maintained at ear height, enabling the artist to move around the stage more freely.

 

Application

• Speech reinforcement
• Live performance stage monitoring
• Reinforcement of vocal and music

Features

• 131 dB peak SPL
• 15” Neodymium low-frequency driver
• 1.4" diameter next generation neodymium compression driver
• Efficient Class-D amplifier technology
• DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR-1/4" combination inputs and XLR loop-through
• Lightweight plywood cabinets with tongue and groove joints
• Weather Proof Paint with 16 gauge steel grille

Specifications:

Model M-15A
Article No. #10031
Class 1*15" Active two way monitor speaker
Power Rating 700 W Continuous*
Frequency Range 50Hz - 18kHz (-10dB)
Frequency Response 53Hz - 18kHz (± 3dB)
SPL** 125dB Continuous, 131dB peak
Transducer Sections
Amplifier Module & DSP POPE Professional® ML-1.5
Low Frequency 1*15" (380mm) Diameter POPE Professional® Transducer
Voice Coil 100 mm (4") Interleaved sandwich Voice coil (ISV)
Magnet Material Neodymium
Power Rating 600 Watts Continuous. Pink Noise
1200 Watts Program
2400 Watts Peak
Bandpass Nominal Impedance
High Frequency 3" (75mm) Compression driver
Voice Coil Diameter 75 mm (3")
Magnet Material Neodymium
Throat Diameter 36 mm (1.4")
Diaphragm Material Titanium
Voice coil material Edgewound flat aluminum
Power Rating / Both drivers 100 Watts Continuous. Pink Noise.
200 Watts Program
400 Watts Peak
Bandpass Sensitivity 109.5dB SPL (1W @ 1m)
Recommended Frequency 1200Hz - 20kHz
Bandpass Nominal Impedance
Crossover Frequency 1.8 kHz
Crossover Mode DSP
Enclosure
Cabinet Construction Trapezoidal, 18 mm, 11-ply plywood
Suspension / Mounting 12 x suspension points, M10 or optional track kit
Grille Powder coated, black, 16-gauge perforated steel grille
Surface Finish Waterproof black texture painting
Coverage Pattern (H x V) 80° x 50°
Packing Foam with wooden crate carton packing or Flight case - optional
Dimensions (H x W x D) 732mm x 459mm x 370mm
Weight 30 kg (66.12 lbs)